Our fully trained workshop technicians can service your skis and snowboards and bring them back to their former condition. We can work miracles to repair your skis and snowboards, whether you've got just a few light scratches, you need an edge sharpen, a wax, or something more major like an edge replacement or a base patch.
Our extensive workshop is fully equipped with both a belt grinder and stone grinder and also full binding mounting facilities for almost every model of binding available.
Our servicing costs vary depending on what work needs doing to the skis or snowboard, please see guide below. When you bring them to the shop for servicing we can look at what work is needed and advise you where necessary.
|Major full service||£40|
|Base grind + edge + wax||£25|
|Base grind + edge||£20|
|Edge sharpen 86/87/88/89/90 degrees||£12|
|Side wall strip||£10|
|Base bevel 0.5/0.75/1 degree||£10|
|Wax/Storage wax only||£12|
|Storage wax (w/full service)||£5|
|Base patch (w/full service)||£20|
|Quiver Killer inserts (plus binding set up £20)||£85|
|Wintersteiger binding check+ report||£20|
|Binding fitting - rail system||£30|
|Binding fitting - drilled/swapped||from £50|
|Binding fitting - drilled/swapped with one item purchased||from £25|
|Binding fitting - non jig etc||from £60|
|Race place mounting||£30|
|FULL SERVICE||Including minor base repair, light base grinding to flatten the base, edge sharpening, waxing and base finishing|
|MAJOR FULL SERVICE||As above but where more major repair work is needed, or if the skis or board have become excessively rusty|
|BASE GRIND, EDGE AND WAX||Light base grinding to flatten the base, edge sharpening, waxing and base finishing|
|EDGE AND WAX||Edge sharpening, waxing and base finishing|
|BASE GRIND||Base grind only|
|EDGE SHARPEN||Edge sharpen only|
|HOT WAX||Iron on hot wax and base finishing (Extra Hard Dry Slope Wax available)|
|SUMMER STORAGE WAX||A thick layer of iron on hot wax applied after a service to protect your skis & snowboard from drying out and going rusty when your not using them over the summer. Then bring them back in a few weeks before you go on holiday and we'll remove the wax, brush and polish them ready for use. On top of a normal service of any kind)|
|BASE REPAIR PATCH||For deep gouges we can cut out a section of the base and replace it with a new section of P-Tex base material patch(When undertaking any major base repair work a full service will also be needed)|
|BINDING DIN TESTING (SKIS)||With Wintersteiger machine.|
|BINDING CHECK (SKIS)||Adjusting bindings to ski boots, adjusting DIN release setting and overall binding check|
|BINDING MOUNT (SKIS)||
Mounting new bindings to new skis, or re-mounting bindings on old skis. We have a vast number of jigs - but we are also happy to mount without a jig(at extra charge). We mount any binding - providing it is still serviceable.
|BINDING MOUNT (BOARD)||Mounting and adjusting bindings to a board|
|SIDEWALL OR TOP SHEET REPAIR|
We offer a full boot fitting service including heat moulding and custom footbeds and we can advise you what is necessary when you come to the shop.
We also carry a large amount of spare parts for boots & equipment but will endeavour to order anything we don't have in stock.